Pulp Disintegrator

Benefits

• Electronic elements protected and located in the upper part of the equipment.
• Safety mechanism with additional stop button.
• Number of revolutions pre-selected on digital control — Revolutions 2975 ± 25 rpm.
• Tilted head enables easy cleaning.
• High performance engine.
• Low noise and low voltage motor.
• Easy to use and extremely ergonomic.
• Digital display enables easy viewing of results.
• CE marked.

Applications

• Paper pulp.
• Paper.

Pulp Disintegrator Apparatus

A disintegrator consisting of:

• A cylindrical container provided with four vanes on the inside.
• A propeller mounted on a vertical shaft, driven by electric motor.
• A counter for recording the number of revolutions of the shaft.

The three blades of the propeller of disintegration are placed in the centre of the vessel at a fixed distance and rotate at a specified speed; revolutions are reflected on a digital readout display.

Test Description

The pulp sample is introduced into the glass and add two quarts of water. Placed in the base of the Disintegrator firmly against the stops and closes the upper head. You select the desired number of revolutions (in case they are different from the previous test) and begins the decay phase. When the digital counter reaches the preset speed the Disintegrator will stop. Once the sample disintegrated pulp may be continued with the process of refining in PFI or Valley type equipment, and finally being able to produce sheets of paper in a standard sheet forming manual or type “Rapid Köthen”. Once obtained, paper sheets can perform various tests or measurements to assess the physical properties, surface, optical, etc.

This Pulp Disintegrator allows the mechanical treatment of pulp in water, so that the interlocking fibres that were free on the sheet of pulp are again separated from each other, without appreciable changes in their structural properties.