Moisture Meter Software DOSOFT-03

Device settings (basic parameters)

The device settings can be read out, changed and written back to the measuring device. The transferred data is automatically stored in a list. The list with the data of the entered serial numbers can be opened

Calibration curves

For materials for which no calibration curve is available, a customer-specific calibration can be carried out. Ev. existing customer-specific calibrations can be read from the measuring device, changed and written back into the measuring device. These special material curves can be saved and opened again.

Time and date

For internal clocks can be synchronized with the clock of the connected computer.

Stored Material Types

Moisture values ​​in the measuring devices g can be read out, statistical values ​​(maximum, minimum and average values) are calculated. The data can be saved stored data can also be opened again. The data can be displayed clearly in a diagram.

External sensors for humidity, air temperature and surface temperature

Sensor Calibration

The Sensors  LFLT  and  WT  can be calibrated. The calibration parameters are  stored in the  AD4A and can be read out. For this purpose, setpoints and actual values ​​can be added, from which the new calibration parameters are calculated and can be rewritten to the  AD4A  . The calibration parameters are automatically stored in a list. The list can be  displayed with reference to the serial number of the  AD4A .